Building the Ultimate Audi: Manual and V8 Drivetrain Swap into an A4 (Part 1)
AI summary of “Building the Ultimate Audi: Manual and V8 Drivetrain Swap into an A4 (Part 1)” by VerMulm Motor Co., generated by Sumvid.
Title
Building the Ultimate Audi: Manual and V8 Drivetrain Swap into an A4 (Part 1)
One-Sentence Summary
The builder begins converting an Audi A4 into an S4-style car by pulling out the old drivetrain, installing a manual transmission and pedal assembly from a donor S4, and preparing to fit a twin-turbo V8 from an S6, while leaving many major tasks unfinished.
Worth Watching If
You enjoy drivetrain swap progress footage and want to see the physical work involved. Much of the runtime is quiet work with music and little explanation, so it is not a step-by-step guide.
Chapters
- [0:00] Introduces the plan: a manual transmission, pedals, and driveline parts from a 2014 S4 donor are going into an A4 chassis.
- [0:32] Shows the 4.0L twin-turbo V8 from a 2013 S6 that will be used, noting that the chosen engine has a hole in the block.
- [2:07] Removes the front assembly, exhaust, and driveshaft, and checks whether the S4 driveshaft is longer.
- [5:04] Engine and transmission are removed from the car, and the subframe is set aside for later.
- [7:11] Introduces a JXP motor mount and a cracked engine used as a mock-up tool, and outlines the handling and brake upgrade goals.
- [7:50] Swaps the automatic shifter for the manual gear selector and linkage, and routes the linkage through the center console.
- [9:24] Removes the steering rack and bolts to swap the pedal assembly, which takes about three hours.
- [11:34] The next day, installs the transmission and begins connecting the linkage and clutch line.
- [14:52] Works on the brake/clutch reservoir swap and the clutch hydraulic line routing.
- [15:54] Notes that a metal retaining clip for the clutch line is missing and needs to be sourced or improvised.
- [17:16] Lists remaining tasks: subframe, driveshaft, rear differential, brake upgrade, calipers, and bleeding the system.
- [18:49] Plans to modify the firewall to create more service room around the engine.
Key Takeaways
- [0:00] The donor parts all come from one 2014 S4 with a manual transmission, and the builder says the gear ratios match and the chassis is identical to the A4.
- [0:32] The builder owns three broken 2013 S6 4.0L twin-turbo V8s and plans to build one good engine from them. The chosen block has a hole in it.
- [0:32] The builder speculates the car could eventually make "four digits" of horsepower, but gives no figures or dyno results.
- [5:04] The engine and transmission were removed as one unit, and the builder plans to install the engine from the front rather than through the subframe.
- [7:11] A JXP Performance motor mount is used to fit the V8 into the A4 platform, and a cracked engine weighing about 100 lb serves as a mock-up.
- [7:50] Swapping to the manual requires the gear selector and linkage from the manual car, which the builder says took less effort than expected.
- [9:24] The pedal swap required removing the entire steering rack and several bolts, taking about three hours.
- [14:21] Transmission installation was done by an unconventional method, but the linkage was easier to reach than expected.
- [15:54] The manual brake reservoir has an outlet hose that feeds the hydraulic clutch, so the reservoir must be replaced along with the clutch line routing.
- [17:46] The builder says the S4 driveshaft may be damaged, the subframe may need to be swapped for an RS5 subframe, and the brake system may need upgrading before the fluid is bled.
- [18:49] The builder plans to move the firewall and reroute components to give more room to service the engine, which he describes as an "ever-evolving project."
Action Items
- Measure the donor driveshaft against the original before committing to it, since the builder found the S4 manual driveshaft was longer.
- Confirm that the gear ratios and transmission mounts match the chassis before installing.
- Plan the pedal assembly removal early, because the steering rack may need to come out.
- Source the retaining clip for the clutch hydraulic line before final assembly, and check the routing for clearance.
- Determine whether the brake system needs upgrading before filling and bleeding the clutch and brake fluid, so the system is bled only once.
- Plan firewall and component routing before engine installation to make future maintenance easier.
Caveats
- The video mentions the JXP Performance motor mount by name. No sponsorship is disclosed in the transcript, but a viewer should not assume it is an unbiased endorsement.
- The "four digit" horsepower claim is speculation with no supporting data.
- The "RS feel" goal and the statement that the car is "genuine RS DNA" are subjective.
- Several parts are unresolved in the video, including the driveshaft, subframe, rear differential, brakes, and clutch clip, so the outcome is uncertain.
- The build includes a cracked engine used as a mock-up, which is not a fully tested configuration.
